Chimney Repairs Maintenance in Holmfirth & West Yorkshire

If you see dampness around your fireplace or on the upstairs ceilings, the culprit is often the lead flashing. This is the waterproof seal where the chimney meets the roof tiles. Over many years, lead can crack or pull away from the stonework. We provide expert lead work to create a tight seal that stops rain from getting in. We’ll check the "soakers" and "flashings" to make sure water runs off your roof rather than into your living room.

The mortar between your bricks or stones is there to keep the structure stable. If you can see gaps in the joints, or if the mortar looks sandy and is crumbling away, your chimney needs repointing. Leaving this too long allows water to get into the stack. When that water freezes, it expands and can actually push the stones apart, making the whole chimney unstable. We rake out the old, failing mortar and replace it with high-quality materials that stand up to the local climate.

If a chimney has been neglected for a long time, or if the masonry is severely damaged, a simple patch-up won't be enough. A chimney stack restoration involves taking the structure down to a safe level and rebuilding it. We use matching stone or brick to make sure the new work looks original. This process often includes fitting a new "flaunching"—that’s the sloped layer of concrete at the very top that holds the pots in place and sheds water.

Many properties in our area are listed or sit within conservation zones. These buildings need a different approach. We have experience with heritage chimney repair, using traditional lime mortars that allow the old stone to "breathe" properly. Using modern cement on an old stone chimney can often cause more harm than good, so we make sure to use the right techniques to satisfy local planning requirements and preserve the history of your home.

Chimney pots can crack due to age or lightning strikes, which becomes a serious falling hazard. If your pot is leaning or looks damaged, we can swap it for a new one that matches your neighbours' houses. At the same time, we check your flues. If you have a redundant chimney, we can install a cowl. This allows the chimney to vent so you don't get damp, but stops birds from nesting and rain from pouring down the hole.